ECO model: Structure in melamine + melamine or lacquered front in standard colors
LACQUERED model: Structure + lacquered front in
If provided GLASS DOORS with perimeter in MDF covered with PVC wood or lacquered finish, with transparent lacquered or reflex glass th. 4.5 mm
BASE: Rectangular frame in melamine already assembled to be fixed under the container equipped with adjustable leveling feet from inside
Drawers - ECO Model: Melamine structure + melamine front or lacquered front in standard colors
Drawers - LACQUERED model: Structure + lacquered front in standard colors.
Handles in powder coated metal or MDF in wood finish.
Use and maintenance
Assembly and installation
Preliminary information for use:
The product is supplied packaged to prevent damage, however it must be handled with care and avoid knocks and falls that could damage the product. For handling it is recommended to use mechanical or manual equipment in order to limit the effort.
Do not expose it to bad weather or extreme environmental situations (temperatures <0 ° C or> 35 ° C; relative humidity> / = 70%). When opening the packaging, do not use sharp objects (cutters) and pay the utmost attention not to damage the product For the products to be assembled, contact specialized personnel
After the first year of use and every three years it is advisable to adjust the screws, check that there is no damage to the product.
The furniture must be anchored to supports of proven solidity, paying attention to the choice of the dowel (both in terms of capacity and type of support e.g. drilled, plasterboard, solid masonry, concrete), and the relative instructions for use of the dowel itself. Any presence of the dowel provided by the manufacturer is to be understood only as a "courtesy gift" so it does not claim to be suitable.
Use of product
The use of the product must comply with the type of indoors product and with temperatures between 0 ° C and 35 ° C; relative humidity less than or equal to 70%. Do not expose it to direct sunlight or sources of heat, which could accelerate its obsolescence as well as modify its brightness and uniformity of color and external finishes. Avoid collisions with hard or sharp objects on the surfaces.
Unless otherwise specified, the shelves are designed to withstand additional weights up to 30 kg / m2 if evenly distributed on the top.
To clean the “wooden” surfaces of the article, use a cotton or wool cloth or a non-abrasive cloth, soaked in water and then wrung out (not dripping); then wipe with a dry (non-abrasive) cloth to dry the surface. Do not scrub quickly and repeatedly. Where the dirt is stubborn it is possible to use household detergents. DO NOT USE ACIDS OR INDUSTRIAL DETERGENTS WHICH COULD DAMAGE THE PRODUCT. For metal components only, it is possible to use industrial solvents as long as they are compatible with the finishes and using non-abrasive supports. IT IS FORBIDDEN TO USE ELECTROMECHANICAL SYSTEMS FOR CLEANING
Any additional information
In the event of the presence of mirrors or glass in general, in the event of a bruise, proceed with the removal of the damaged part either by contacting specialized personnel or by using suitable anti-cut gloves.
Where door sliding devices are provided, make sure that they function correctly and frequently clean and vacuum up dust and accumulations that could obstruct the correct sliding.
The panels used for the structure have formaldehyde emission class E1. There are no dangerous substances to report pursuant to Reg (EU) 1907/2006 (REACH)
Although the product can keep its functions for a long period, if used in compliance with this sheet, it is nevertheless designed by the manufacturer to guarantee its technical and aesthetic performance for a maximum period of 2 years.
Information on end-of-use disposal
At the end of use, the product must be delivered to authorized waste treatment / disposal facilities, in accordance with current legislation.