- HomeHome
- Product SheetProduct Sheet
- bedroomsbedrooms
- Nightstands
Materials used
TOP: Melamine panel th.1,8 o 2,8 cm standard colors.
BASE AND HAT: Melamine panel th.2.5 cm, edged with paper board of 4/10 cm and ABS 4/10 cm. SIDES : Melamine panel th.1,8 cm, mdi colors series edged with ABS edge th.4/10 or 10/10 cm; or equipped with MDF profile wrapped in various finishes as standard.
DRAWER FRONT: Melamine panel th.1,8-2,8 cm standard colors or matt lacquered and glossy colors of the series with edge in ABS th.1 mm with pre-hole for handle.
DRAWER (inside): 4-sided structure covered with PVC light brown 3D texture effect; with medium density fiber bottom.
ACCESSORIES AND HARDWARE.
HINGES AND BASES (containers): cushioned in steel with double height and depth adjustment.
GUIDES FOR DRAWERS: “Push to open” and "Stop Control / Silent System" metal guide with end-of-stroke locking, easy opening-closing, height adjustment system and “soft” closing.
HANDLES: brown aluminum, slate and champagne shipped already assembled.
SPECIFIC WOOD MATERIALS:
IN THE MELAMINE VERSION: Class E1 wood particle board (low formaldehyde content), melamine coated with wood-like melamine paper, standard colors;
IN THE MATT LACQUERED VERSION: Class E1 wood particle board (low formaldehyde content), coated with melamine paper and / or lacquered with water or polyurethane, UV and non-toxic acrylic paints;
IN THE GLOSS LACQUERED VERSION: Class E1 wood particle board (low formaldehyde content), melamine coated with melamine paper and / or lacquered with polyurethane, UV, or non-toxic acrylic paints.
Use and Maintenance
Assembly and installation
Preliminary information for use:
The product is supplied packaged to prevent damage, however it must be handled with care and avoid knocks and falls that could damage the product. For handling it is recommended to use mechanical or manual equipment in order to limit the effort.
Do not expose it to bad weather or extreme environmental situations (temperatures <0 ° C or> 35 ° C; relative humidity> / = 70%).
When opening the packaging, do not use sharp objects (cutters) and pay the utmost attention not to damage the product
For the products to be assembled, contact specialized personnel
After the first year of use and every three years it is advisable to adjust the screws, check that there is no damage to the product
Furniture whose height is greater than the depth of the base must be anchored to supports of proven solidity, paying attention to the choice of the dowel (both in terms of capacity and type of support e.g. drilled, plasterboard, solid masonry, concrete), and the relative instructions for use of the dowel itself. Any presence of the dowel provided by the manufacturer is to be understood only as a "courtesy gift" so it does not claim to be suitable.
Use of product
The use of the product must comply with the type of indoors product and with temperatures between 0 ° C and 35 ° C; relative humidity less than or equal to 70%. Do not expose it to direct sunlight or sources of heat, which could accelerate its obsolescence as well as modify its brightness and uniformity of color and external finishes. Avoid collisions with hard or sharp objects on the surfaces.
The article is designed to support the weights and stresses normally applicable in the common use of the item type.. In particular, the DRAWERS have a maximum capacity of 20 kg /mq with evenly distributed weight..ABSOLUTELY AVOID HANGING OR SUPPORTING PERSONS OR GIVING EXCESSIVE STRESSES TO THE STRUCTURE (OVERLOADING OR FALLING OBJECTS).
Maintenance
To clean the “wooden” surfaces of the article, use a cotton or wool cloth or a non-abrasive cloth, soaked in water and then wrung out (not dripping); then wipe with a dry (non-abrasive) cloth to dry the surface. Do not scrub quickly and repeatedly. Where the dirt is stubborn it is possible to use household detergents. DO NOT USE ACIDS OR INDUSTRIAL DETERGENTS WHICH COULD DAMAGE THE PRODUCT. For metal components only, it is possible to use industrial solvents as long as they are compatible with the finishes and using non-abrasive supports. IT IS FORBIDDEN TO USE ELECTROMECHANICAL SYSTEMS FOR CLEANING
Any additional information
ABSOLUTELY AVOID EXCESSIVE STRESS AND STRESS OF THE STRUCTURE (OVERLOAD OR JUMPS)
The drawer sliding mechanism is cushioned, with anti-release latch, anti-exit safety and meet the requirements of the impact test according to EN 15338
Dangerous substances
The panels used for the structure have formaldehyde emission class E1. There are no dangerous substances to report pursuant to Reg (EU) 1907/2006 (REACH)
Life cycle
Although the product can keep its functions for a long period, if used in compliance with this sheet, it is nevertheless designed by the manufacturer to guarantee its technical and aesthetic performance for a maximum period of 2 years.
Information on end-of-use disposal
At the end of use, the product must be delivered to authorized waste treatment / disposal facilities, in accordance with current legislation