Giessegi.it
Product Sheet
Environment / price list

bedrooms

Type of article

Wardrobes Open

Materials used

HINGED GLASS DOOR: Doors with tempered 4 mm glass. Aluminum perimeter frame from 2,5 cm thick.
SIDES: 4 mm tempered glass. Perimeter frame in aluminum th.2.5 cm, equipped with levelling feet.
DIVIDERS: 2,5 cm thick aluminum frame, equipped with levelling feet.

SHELVES (WARDROBES): Laminated teak panel sp.3.5 cm.
BACKRESTS (WARDROBES): TEK melamine panel sp.1,2 cm.
BASE AND HAT (WARDROBES): TEK melamine panel sp.2.5 cm, edged with 4/10 cm paper border and 10/10 ABS border.
INTERNAL CHEST OF DRAWERS: TEK laminated panel sp.2,5 (FRONT) E 3,5 (STRUCTURE) cm, ABS edge sp.10/10.
DRAWER (inside): 4-sided structure covered with PVC light brown 3D texture effect; with medium density fiber bottom.

ACCESSORIES AND HARDWARE.
HINGES AND BASES (containers): cushioned in steel with double height and depth adjustment.
GUIDES FOR DRAWERS: “Push to open” and "Stop Control / Silent System" metal guide with end-of-stroke locking, easy opening-closing, height adjustment system and “soft” closing.
SHELF SUPPORTS (wall): nickel-colored metal, “bayonet” type.
ASSEMBLY JOINTS: in steel formed by bush, pin, bush and grain.
CLOTHES HANGER TUBES: nickel-colored metal, 1.5 x 2.2 cm section or 1x3 cm lacquered iron in various lengths.
HANDLES: of different shapes and materials sent with neck separated from the rest.

SPECIFIC WOOD MATERIALS:
IN THE MELAMINE VERSION: E1 class wood particle board (low formaldehyde content), faced with TEK wood-type melamine paper.

If the article is completed with electronic accessories (lighting) provided by GIESSEGI ensure that they are installed in accordance with the manufacturer’s requirements. In particular, ensure that clothing or other flammable material is located at a minimum distance of 30 cm. Keep them out of reach of the CHILDREN.

Use and Maintenance

Assembly and installation

Preliminary information for use:
The product is supplied packaged to prevent damage, however it must be handled with care and avoid knocks and falls that could damage the product. For handling it is recommended to use mechanical or manual equipment in order to limit the effort.
Do not expose it to bad weather or extreme environmental situations (temperatures <0 ° C or> 35 ° C; relative humidity> / = 70%).
When opening the packaging, do not use sharp objects (cutters) and pay the utmost attention not to damage the product
For the products to be assembled, contact specialized personnel

After the first year of use and every one years it is advisable to adjust the screws, check that there is no damage to the product.

The furniture must be anchored to supports of proven solidity, paying attention to the choice of the dowel (both in terms of capacity and type of support e.g. drilled, plasterboard, solid masonry, concrete), and the relative instructions for use of the dowel itself. Any presence of the dowel provided by the manufacturer is to be understood only as a "courtesy gift" so it does not claim to be suitable.

Use of product

The use of the product must comply with the type of indoors product and with temperatures between 0 ° C and 35 ° C; relative humidity less than or equal to 70%. Do not expose it to direct sunlight or sources of heat, which could accelerate its obsolescence as well as modify its brightness and uniformity of color and external finishes. Avoid collisions with hard or sharp objects on the surfaces.

The article is designed to support the weights and stresses normally applicable in the common use of the item type.
In particular: the SHELVES have a maximum capacity of 50 kg /mq with evenly distributed weight;
the DRAWERS have a maximum capacity of 20 kg /mq with evenly distributed weight; the HANGERS have a capacity of 20 kg with evenly distributed weight; the possible presence of the "servetto" in order to facilitate the use of the hanger at higher levels has a maximum capacity declared by the manufacturer of 12 kg; The REMOVABLE SHELVES have a maximum capacity of 10 kg/m2 with evenly distributed weight.
ABSOLUTELY AVOID HANGING OR SUPPORTING PERSONS OR GIVING EXCESSIVE STRESSES TO THE STRUCTURE (OVERLOADING OR FALLING OBJECTS).

Maintenance

To clean the “wooden” surfaces of the article, use a cotton or wool cloth or a non-abrasive cloth, soaked in water and then wrung out (not dripping); then wipe with a dry (non-abrasive) cloth to dry the surface. Do not scrub quickly and repeatedly. Where the dirt is stubborn it is possible to use household detergents. DO NOT USE ACIDS OR INDUSTRIAL DETERGENTS WHICH COULD DAMAGE THE PRODUCT. For metal components only, it is possible to use industrial solvents as long as they are compatible with the finishes and using non-abrasive supports.
IT IS FORBIDDEN TO USE ELECTROMECHANICAL SYSTEMS FOR CLEANING

Any additional information

The fixing details are made of DD11 steel according to EN 10111, powder coated. The tubes are of CE marked origin according to UNI EN 10219 - EN 10210. Mirrors: they are made with Light Silver Glass 4 mm film, in compliance with UNI EN 1036.
Laminated Glass: made of 4mm Silver Grey Europe glass, interlayer PVB 0.38mm, 4mm Silver Grey Europe glass, classified 2B according to EN12600. Tempered glass: made of annealed 4mm glass or laminated glass (4 mm glass +interlayer PVB 0.38mm +4mm glass) annealed classified 2B2 according to EN12600.

In the event of the presence of mirrors or glass in general, in the event of a bruise, proceed with the removal of the damaged part either by contacting specialized personnel or by using suitable anti-cut gloves.

Where door sliding devices are provided, make sure that they function correctly and frequently clean and vacuum up dust and accumulations that could obstruct the correct sliding.

Dangerous substances

The panels used for the structure have formaldehyde emission class E1. There are no dangerous substances to report pursuant to Reg (EU) 1907/2006 (REACH)

Life cycle

Although the product can keep its functions for a long period, if used in compliance with this sheet, it is nevertheless designed by the manufacturer to guarantee its technical and aesthetic performance for a maximum period of 4 years.

Information on end-of-use disposal

At the end of use, the product must be delivered to authorized waste treatment / disposal facilities, in accordance with current legislation

Giessegi

È necessario aggiornare il browser

Il tuo browser non è supportato, esegui l'aggiornamento.
Di seguito i link ai browser supportati

Se persistono delle difficoltà, contatta l'Amministratore di questo sito.
digital agency greenbubble

Этот сайт использует файлы cookie.
Мы и некоторые третьи лица используем файлы cookie, как указано в положении об использовании файлов cookie.
Вы можете дать согласие на использование этих технологий, закрыв это уведомление, перейдя по ссылке или нажав кнопку вне этого уведомления либо продолжив навигацию каким-либо иным образом.
Управление настройками согласия
Следующая панель позволит вам выразить свои предпочтения в плане согласия с технологиями, которые мы применяем, чтобы предлагать функции и выполнять действия, описанные ниже. Чтобы получить дополнительную информацию, посетите нашу страницу, касающуюся политики использования файлов cookie. Вы можете пересмотреть и изменить свой выбор в любое время на соответствующей странице.
Технические файлы cookie Строго необходимые
Эти инструменты отслеживания строго необходимы для обеспечения функционирования и предоставления тех услуг, которые вы запросили у нас, и, соответственно, они не требуют вашего согласия.
Аналитические
Эти инструменты отслеживания позволяют нам измерять трафик и анализировать ваше поведение с целью улучшения нашего сервиса.
Таргетинг и реклама
Эти инструменты отслеживания позволяют нам предоставлять вам персонализированный коммерческий контент на основе вашего поведения, а также управлять, доставлять и отслеживать рекламные объявления.