FRAME: Made of anodized aluminum class 10 +/- 2 microns according to ISO2360 and ISO 10681. SLIDING DOORS : 1.With laminated panel class E1 rounded edges with ABS th.15/10 woodtype finishes MELAMINE or LACQUERED matt and glossy standard colors.
SLIDING MIRROR DOOR: Mod. UNO VETRO 0.4 glued on 1.4 cm melamine panel.
SLIDING GLASS DOOR: 0.4 GLASS glued on 1.4 cm melamine panel with handles on the long sides in painted aluminum. The frames of the doors are in aluminum, or lacquered or melamine standard colors.
In order to ensure the necessary load-bearing capacity/mechanical safety, it shall be secured in accordance with the assembly instructions provided by the GIESSEGI, paying particular attention to the fixings of the solid-walled side axles and of the ceiling traverse. All the axes must be fixed with suitable plugs by a professional operator carefully evaluating the tightness of the structure to which they must be fixed. The doors must be exclusively those provided by the GIESSEGI for this type of structure provided with the necessary accessories. Always fix to the ground the inserts that act as sliding guides for the doors making sure of their tightness.
Use and Maintenance
Assembly and installation
Preliminary information for use:
The product is supplied packaged to prevent damage, however it must be handled with care and avoid knocks and falls that could damage the product. For handling it is recommended to use mechanical or manual equipment in order to limit the effort.
Do not expose it to bad weather or extreme environmental situations (temperatures <0 ° C or> 35 ° C; relative humidity> / = 70%).
When opening the packaging, do not use sharp objects (cutters) and pay the utmost attention not to damage the product
For the products to be assembled, contact specialized personnel
After the first year of use and every one years it is advisable to adjust the screws, check that there is no damage to the product
Use of product
The use of the product must comply with the type of indoors product and with temperatures between 0 ° C and 35 ° C; relative humidity less than or equal to 70%. Do not expose it to direct sunlight or sources of heat, which could accelerate its obsolescence as well as modify its brightness and uniformity of color and external finishes. Avoid collisions with hard or sharp objects on the surfaces.
The maximum load capacity of the fastening/sliding mechanism of the doors, with a maximum length of 375 cm, is max 100 kg (if anchored only laterally) while with the ceiling fixings (made with suitable dowels with an extraction capacity equal to or greater than 100 kg carried out in accordance with the technical sheet of the manufacturer) the maximum acceptable capacity is 300kg
To clean the “wooden” surfaces of the article, use a cotton or wool cloth or a non-abrasive cloth, soaked in water and then wrung out (not dripping); then wipe with a dry (non-abrasive) cloth to dry the surface. Do not scrub quickly and repeatedly. Where the dirt is stubborn it is possible to use household detergents. DO NOT USE ACIDS OR INDUSTRIAL DETERGENTS WHICH COULD DAMAGE THE PRODUCT. For metal components only, it is possible to use industrial solvents as long as they are compatible with the finishes and using non-abrasive supports. IT IS FORBIDDEN TO USE ELECTROMECHANICAL SYSTEMS FOR CLEANING
Any additional information
The fixing details are made of DD11 steel according to EN 10111, powder coated. The tubes are of CE marked origin according to UNI EN 10219 - EN 10210. Mirrors: they are made with Light Silver Glass 4 mm film, in compliance with UNI EN 1036.
Laminated Glass: made of 4mm Silver Grey Europe glass, interlayer PVB 0.38mm, 4mm Silver Grey Europe glass, classified 2B according to EN12600. Tempered glass: made of annealed 4mm glass or laminated glass (4 mm glass +interlayer PVB 0.38mm +4mm glass) annealed classified 2B2 according to EN12600.
ABSOLUTELY AVOID HANGING OR SUPPORTING PERSONS OR GIVING EXCESSIVE STRESSES TO THE STRUCTURE (OVERLOADING OR FALLING OBJECTS).
In the event of the presence of mirrors or glass in general, in the event of a bruise, proceed with the removal of the damaged part either by contacting specialized personnel or by using suitable anti-cut gloves.
Where door sliding devices are provided, make sure that they function correctly and frequently clean and vacuum up dust and accumulations that could obstruct the correct sliding.
The panels used for the structure have formaldehyde emission class E1. There are no dangerous substances to report pursuant to Reg (EU) 1907/2006 (REACH)
Although the product can keep its functions for a long period, if used in compliance with this sheet, it is nevertheless designed by the manufacturer to guarantee its technical and aesthetic performance for a maximum period of 4 years.
Information on end-of-use disposal
At the end of use, the product must be delivered to authorized waste treatment / disposal facilities, in accordance with current legislation