STRUCTURE (BOISERIE): Structure made with rack fixed to the wall, in oxidized aluminium. Bracket in painted iron with epoxy paint.
PANEL: Laminated panel or lacquered thick. 1.8 mm in standard colors, or LED with aluminum frame and Methacrylate panel with aluminum frame. Can apply a mirror th. 4.
SHELVES / BASE: Melamine panel sp.3.5 cm Melamine and matt lacquered standard colors. Edged c/ paper board 4/10 and ABS 10/10.
METAL SHELVES: painted with epoxy brown slate and champagne paint.
SMOOTH DOOR : 1.With laminated panel class E1 rounded edges with ABS sp.15/10 wood-type finishes or matt lacquered and glossy standard colors.
MIRROR DOOR : Mod. UNO VETRO 0.4 glued on 1.4 cm laminated panel.
SLIDING GLASS DOOR: Doors with 0.4 mm tempered and/or silk-screened glass with anti-shutter film applied on the back. Perimeter aluminum frame or panels sp. 18 with handles on the long sides.
CHESTS OF DRAWERS: 1,8 cm thick panel Melamine and/or matt lacquered standard colors. Edged c/paper board 4/10 and ABS 10/10. Also available on wheels.
DRAWER FRONT: 1,8 cm thick panel Melamine and/or matt lacquered standard colours. Edged ABS 10/10.Also available in the GLASS version with MDF frame covered in wood effect leaf or lacquered and 4 mm thick glass.
DRAWER INSIDE Panel sp.1,2 cm CHIPBOARD COVERED WITH FABRIC EFFECT LEAF, MDF fabric effect bottom.
STORAGE CABINET Panel sp.1,4 cm Melamine and/or matt lacquered standard colours. Edged c/edge paper 4/10 and ABS 10/10.
ACCESSORIES AND HARDWARE.
HINGES AND BASES (containers): cushioned in steel with double height and depth adjustment GUIDE GUIDES FOR DRAWERS: “Push to open” and "Stop Control / Silent System" metal guide with end-of-stroke locking, easy opening-closing, height adjustment system and “soft” closing.
CLOTHES HANGER TUBES: nickel-colored metal, 1.5 x 1,5 cm in various lengths.
DRAWER HANDLES: brown aluminum, slate and champagne sent already mounted.
SPECIFIC WOOD MATERIALS:
IN THE MELAMINE VERSION: Class E1 wood particle board (low formaldehyde content), melamine coated with wood-like melamine paper, standard colors;
IN THE MATT LACQUERED VERSION: Class E1 wood particle board (low formaldehyde content), coated with melamine paper and / or lacquered with water or polyurethane, UV and non-toxic acrylic paints;
IN THE GLOSS LACQUERED VERSION: Class E1 wood particle board (low formaldehyde content), melamine coated with melamine paper and / or lacquered with polyurethane, UV, or non-toxic acrylic paints.
Use and Maintenance
Assembly and installation
Preliminary information for use:
The product is supplied packaged to prevent damage, however it must be handled with care and avoid knocks and falls that could damage the product. For handling it is recommended to use mechanical or manual equipment in order to limit the effort.
Do not expose it to bad weather or extreme environmental situations (temperatures <0 ° C or> 35 ° C; relative humidity> / = 70%).
When opening the packaging, do not use sharp objects (cutters) and pay the utmost attention not to damage the product
For the products to be assembled, contact specialized personnel
After the first year of use and every one years it is advisable to adjust the screws, check that there is no damage to the product.
The furniture must be anchored to supports of proven solidity, paying attention to the choice of the dowel (both in terms of capacity and type of support e.g. drilled, plasterboard, solid masonry, concrete), and the relative instructions for use of the dowel itself. Any presence of the dowel provided by the manufacturer is to be understood only as a "courtesy gift" so it does not claim to be suitable.
Use of product
The use of the product must comply with the type of indoors product and with temperatures between 0 ° C and 35 ° C; relative humidity less than or equal to 70%. Do not expose it to direct sunlight or sources of heat, which could accelerate its obsolescence as well as modify its brightness and uniformity of color and external finishes. Avoid collisions with hard or sharp objects on the surfaces
The article is designed to support the weights and stresses normally applicable in the common use of the item type.
In particular: the SHELVES have a maximum capacity of 30 kg /mq with evenly distributed weight;
the DRAWERS have a maximum capacity of 20 kg /mq with evenly distributed weight; the HANGERS have a capacity of 20 kg with evenly distributed weight; the possible presence of the "servetto" in order to facilitate the use of the hanger at higher levels has a maximum capacity declared by the manufacturer of 12 kg; The REMOVABLE SHELVES have a maximum capacity of 10 kg/m2 with evenly distributed weight.
ABSOLUTELY AVOID HANGING OR SUPPORTING PERSONS OR GIVING EXCESSIVE STRESSES TO THE STRUCTURE (OVERLOADING OR FALLING OBJECTS).
To clean the “wooden” surfaces of the article, use a cotton or wool cloth or a non-abrasive cloth, soaked in water and then wrung out (not dripping); then wipe with a dry (non-abrasive) cloth to dry the surface. Do not scrub quickly and repeatedly. Where the dirt is stubborn it is possible to use household detergents. DO NOT USE ACIDS OR INDUSTRIAL DETERGENTS WHICH COULD DAMAGE THE PRODUCT. For metal components only, it is possible to use industrial solvents as long as they are compatible with the finishes and using non-abrasive supports. IT IS FORBIDDEN TO USE ELECTROMECHANICAL SYSTEMS FOR CLEANING
Any additional information
The fixing details are made of DD11 steel according to EN 10111, powder coated. The tubes are of CE marked origin according to UNI EN 10219 - EN 10210.
In the event of the presence of mirrors or glass in general, in the event of a bruise, proceed with the removal of the damaged part either by contacting specialized personnel or by using suitable anti-cut gloves.
Where door sliding devices are provided, make sure that they function correctly and frequently clean and vacuum up dust and accumulations that could obstruct the correct sliding
The panels used for the structure have formaldehyde emission class E1. There are no dangerous substances to report pursuant to Reg (EU) 1907/2006 (REACH)
Although the product can keep its functions for a long period, if used in compliance with this sheet, it is nevertheless designed by the manufacturer to guarantee its technical and aesthetic performance for a maximum period of 4 years.
Information on end-of-use disposal
At the end of use, the product must be delivered to authorized waste treatment / disposal facilities, in accordance with current legislation