- Fiche produitFiche produit
- Extendable Console
STRUCTURE - Structure in lacquered MDF / Shelves for extension in wood particles: melamine or lacquered in the visible part and edges.
Aluminum extension mechanism.
Hardware in metal alloy or plastic
Use and maintenance
Assembly and installation
Preliminary information for use:
The product is supplied packaged to prevent damage, however it must be handled with care and avoid knocks and falls that could damage the product. For handling it is recommended to use mechanical or manual equipment in order to limit the effort.
Do not expose it to bad weather or extreme environmental situations (temperatures <0 ° C or> 35 ° C; relative humidity> / = 70%). When opening the packaging, do not use sharp objects (cutters) and pay the utmost attention not to damage the product. The base console is supplied assembled with the built-in extension mechanism, fixed to the base with a raw panel at the bottom that must be removed before use.
Before using the extended console, it is necessary to contact specialized personnel to previously fix the junction clips of the individual elements to each other or to the supporting structure. In subsequent uses of the elongated console, proceed by unhooking the clips between the two elements of the structure, space them as desired, insert the individual extensions making sure they fit together with the side of the structure and then tighten the connecting clips so that they become a body. the entire support surface is unique (see the specific assembly sheet included in the package).
After the first year of use and every years it is advisable to adjust the screws, check that there is no damage to the product.
The console extensions, when not in use, must be stored with care, taking care that they do not suffer abrasions and damage. Avoid overlapping or side-by-side panels by placing the painted part in contact with the part containing the junction clips.
Use of product
The use of the product must comply with the type of indoors product and with temperatures between 0 ° C and 35 ° C; relative humidity less than or equal to 70%. Do not expose it to direct sunlight or sources of heat, which could accelerate its obsolescence as well as modify its brightness and uniformity of color and external finishes. Avoid collisions with hard or sharp objects on the surfaces.
Unless otherwise specified, the article is designed to support additional weights up to 30 kg / m2 if evenly distributed on the top. The article is designed to be used continuously without extensions. The use of the extended console must be occasional and taking care to pay the utmost attention when moving (for example, do not push or pull from a single point) so that no deformations are made to the product and damage in general.
To clean the “wooden” surfaces of the article, use a cotton or wool cloth or a non-abrasive cloth, soaked in water and then wrung out (not dripping); then wipe with a dry (non-abrasive) cloth to dry the surface. Do not scrub quickly and repeatedly. Where the dirt is stubborn it is possible to use household detergents. DO NOT USE ACIDS OR INDUSTRIAL DETERGENTS WHICH COULD DAMAGE THE PRODUCT. For metal components only, it is possible to use industrial solvents as long as they are compatible with the finishes and using non-abrasive supports.
IT IS FORBIDDEN TO USE ELECTROMECHANICAL SYSTEMS FOR CLEANING
Any additional information
ABSOLUTELY AVOID EXCESSIVE STRESS AND STRESS OF THE STRUCTURE (OVERLOAD OR JUMPS)
The panels used for the structure have formaldehyde emission class E1. There are no dangerous substances to report pursuant to Reg (EU) 1907/2006 (REACH)
Although the product can keep its functions for a long period, if used in compliance with this sheet, it is nevertheless designed by the manufacturer to guarantee its technical and aesthetic performance for a maximum period of 2 years.
Information on end-of-use disposal
At the end of use, the product must be delivered to authorized waste treatment / disposal facilities, in accordance with current legislation.